Procedure For Removing - Toshiba V Series User Manual

Chapter 4 Installation and Wiring
4
138

Procedure for removing

(1) Turn off power of the model 2000 and external power supplied to I/O modules.
(2) Remove the cover of modules.
(3) Remove the screw at the top of the module
(4) Loosen the screw at the top
of module.
(5) Push the upper lock lever of
module by one hand, and
press the lower mark of
module by another hand.
(6) Remove the module
vertically against the base.
model 2000 Sequence Controller S2 User's Manual -Basic Hardware-