Mounting/Removing The Module - Toshiba V Series Manual

Chapter 8 Installation and Wiring

8.2 Mounting/Removing the Module

8
132
Follow the instructions specified in the section Mounting the Module of the Sequence
Controller User's Manual - Basic Hardware in mounting or removing the module.
• Since the DN311 is designed for the model 3000 of the Integrated Controller V Series, be
sure to mount your DN311 in the base unit, instead of using it alone. Don't use it for other
applications. Otherwise, a there is the danger of electric shock, bodily injuries, and/or
mechanical malfunction.
• Be sure to turn power off (switch off the S controller and the network) before mounting or
removing the DN311. Failing to do so will cause electric shock, malfunction, and/or failure.
• Keep the DN311 free of wire fragments and other foreign matter. Failing to do so can cause
fire, failure, and/or malfunction.
• Secure the joints of the connectors and cables and the the DN311 mounted in the base unit
with stoppers or screws to prevent them from slipping out of place or getting unsteady.
If they are not adequately secured, vibration, etc. can cause trouble or malfunction.
Caution
model 3000 DeviceNet Module Manual (DN311/DN311A)