Mounting And Removing Modules - Toshiba V Series User Manual

Chapter 9 Installation and Wiring

9.2 Mounting and Removing Modules

9
206
Be sure to follow the guideline included in "Mounting Modules" section in the S3 User's
Manual - Hardware.
• The EN311 is designed specially for the S controller and should only be mounted and used
in an S controller base unit. Do not use this module independently or mounted in any other
equipment. Such usage could result in electrical shocks, personal injury, or damage to the
EN311 and other equipment.
• The EN311 itself should only be mounted or removed when all power is turned off. Similarly,
connections to the terminal block should only be made or removed when all power is turned
off. Not observing this precaution could result in electrical shocks, malfunctions, or damage
to the EN311 or other equipment.
• Do not allow foreign objects such as wire shreds to get into the EN311. This could result in
fire, breakdown, or malfunction.
• Verify that connectors, cables, and the mounting of the EN311 itself in the base unit are all
secured with screws or stops and that there is no play, missing screws, or disconnections in
any of these parts.
If any of these parts is inadequately secured, breakdown or malfunction could occur as the
result of vibration.
Caution
Ethernet module User's Manual