Toshiba V Series User Manual page 16

Be Sure To Observe The Following
To ensure operator safety and normal product operation, be sure to observe the
following.
1. Carefully read the manual before using the product.
2. Avoid installing and storing the product in any of the following places.
(1) Dusty place
(2) Place generating corrosive gases (SO
(3) Place where the product may be subject to vibration and shock
(4) Temperatures too low or too high to meet the conditions of installation specified
(5) Highly humid place
3. If the ambient temperature or the internal temperature of the product has risen
too high, or if the product has failed, stop using it, switch it off, and contact the
nearest Toshiba service office.
4. Do not open the casing of the product.
5. Do not modify the product.
6. Do not drop the product during transit.
7. Installation, wiring, operation, and maintenance should be performed by
persons with general knowledge of control equipment. Erroneous use can
result in electrical shock, fire, malfunction, or operation error. Therefore, if you
do not have sufficient knowledge of control equipment, avoid performing
installation, wiring, operation, or maintenance by yourself. Ask a qualified
person.
8. This manual has been written for users who are familiar with Programmable
Controllers and industrial control equipment. Contact Toshiba if you have any
questions about this manual.
xiv
in the manual
, H S, etc.)
2 2
model 2000 Sequence Controller S2 User's Manual -Basic Hardware-