Removing The Module / Base Unit - Toshiba nv Series Instruction Manual

Chapter 3 Installation and Wiring

3.7 Removing the module / base unit

To remove the module, reverse the procedure in "3.2 Module installation". At this time, turn off the power of
the base unit.
To remove the base unit from the DIN rail, remove all cables and slide the stopper (white plastic) on the back
of the base unit to the outside with a screwdriver to remove it.
44
6F8C1877
Figure 3-18 Removing the base unit
Slide the lock outward and
pull out the unit