Run Contact Operation - Toshiba V Series User Manual

Chapter 1 System Configuration
1
42
Operate the model 2000 and the related modules which closing the terminal covers. Keep
hands away from terminals while power on, to avoid the risk of electrical shock.
This power supplyy module is dedicated power supply for the model 2000. Do not use it by
itself for other purposes.
• Power status LED (POWER)
Lights when the internal 5V is output normally.
• Power supply terminal (AC input: L, N and DC input: +, -)
Connects the power line (see 4.6 Wiring of the power supply).
• Line filter ground terminal (LG)
A neutral point of the line filter at the primary power supply for grounding (see 4.5
Grounding).
• Frame ground terminal (FG)
Connected to the unit frame for grounding (see 4.5 Grounding).
• External 24V supply terminal
Supplies 24V DC to external devices such as sensors, relay output modules and
analog I/O modules, etc.
• RUN contact (operation signal output terminal)
Used for indicating normal operation of the controller module to external devices (1a
contact) and closes during normal operation.
The contact opens (OFF) if any of the control modules
Terminal specification: 240V AC (+10%)/24V DC (+20%)-2A (Max)
RUN contact
ON(closed) All controllers operate normally.
OFF(opened) Any of controllers stops or operates abnormally.
Supplementary
*1 Modules relating to the RUN contact
The RUN contact only relates to the status of controller modules.
Caution
Table 1-34 RUN contact operation
Operation
model 2000 Sequence Controller S2 User's Manual -Basic Hardware-
*1
stops or operates abnormally.
Remarks
It is also OFF during
initialization.