F. Setting The Serial Setup Configuration - Xerox 4215 User Manual

<
F. Setting the Serial Setup Configuration
This example shows you how to change the data
bits and parity settings for the serial setup
configuration.
1. Press the Menu key to take the printer
2. Press the Down arrow key until the display
3. Press the Enter key.
4. Press the Down arrow key until the display
5. Press the Enter key.
6. Press the Down arrow key to display Serial
7. Press the Enter key.
cut top 2"
offline and display the Control Panel Main
Menu. The display reads:
LANGUAGE
= English
reads SET INTERFACE.
PRINTOUT MENU.
reads SERIAL
Enable I/F
= On
Setup.
Flow Control
= Xon/Xoff
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
Operator Guide
The display reads
The display reads:
The display reads:
cut 1">
2-51