Stacker Panel - Xerox 495 Operator's Manual

OPERATOR PANELS

Stacker panel

Stacker Panel
Name
Printer Start switch This has the same function as the Start button on the touch screen (see page 26).
Printer Stop switch This has the same function as the Stop button on the touch screen (see page 26).
Printer Reset
switch
Table Auto switch
Table Stop switch
Table Down switch
Paper output selec-
tor lever
Page 2-32
The stacker panel is at the top of the stacker. Open the right stacker door
on the front of the printer to use the stacker panel.
The components are shown in the following table:
This has the same function as the Reset button on the touch screen (see page 26).
Automatically lifts the table to the height suitable for paper folding. Then the paper guide
moves to the set level. If this is operated when printing, an error will occur.
When the paper output selector lever does not have the stacker selected, it is disabled.
Stops lifting or lowering the stacker table. If this is operated when printing, an error will
occur.
When the paper output selector lever does not have the stacker selected, it is disabled.
Lowers the stacker table. The paper guide opens to the specified position and stops. If this
is operated when printing, an error will occur.
When the paper output selector lever does not have the stacker selected, it is disabled.
Used to select whether the paper will be output to the stacker or to another post-process-
ing device.
Function
Xerox 495 Continuous Feed Duplex Printer Operator Guide
PRODUCT OVERVIEW
Paper output
selector lever
Paper tension
lever