Changing The Notebook Settings - Xerox 495 Operator's Manual

RUNNING JOBS

Changing the notebook settings

Page 4-6
7. Check that the correct paper is loaded in the printer (see "Paper
Loading" on page 5-3).
8. Set the Check Output value.
9. Press the
The job will be printed once the host has sent it.
Notebook settings are provided to change certain parameters set in a job
definition.
Note: You can only change settings here if you are the Key Operator, or
if the Key Operator has provided you with access. If access is allowed,
the bottom right corner of the notebook is folded over as shown in the
illustration below.
If the Notebook area is available, it comprises four pages. You can
change pages by pressing the folded corner.
RUNNING PRODUCTION JOBS
button to set the printer to a ready state.
Notebook
Unlocked
Indication
Xerox 495 Continuous Feed Duplex Printer Operator Guide