Replacing The Smoke Filter - Xerox 495 Operator's Manual

REPLACING THE SMOKE FILTER

Replacing the smoke filter
Page 8-26
The smoke filter must be replaced when Error Code 0B-01 is displayed.
To replace the smoke filter, proceed as follows:
1. Press the button to switch to the consumables view which
shows the usage of all consumables and press the Change button
beside Smoke Filter.
The consumables replacement screen for the smoke filter will be
displayed.
2. Open the left stacker door.
3. Open the smoke filter door.
4. Hold the handle of the smoke filter and pull forward to extract it.
5. Insert a new smoke filter with the face up.
6. Close the smoke filter door and the left stacker door.
7. Press the button on the right of the touch screen to confirm the
change and to return to the consumables view.
PERFORMING ROUTINE MAINTENANCE
Handle
Smoke Filter Door
Smoke Filter
Xerox 495 Continuous Feed Duplex Printer Operator Guide