Defining Production Jobs - Xerox 495 Operator's Manual

7.

Defining production jobs

This chapter contains the procedures for creating jobs. All of the screens
are accessed under the Definitions tab, the facilities of which are
available to the Key Operator level User and above.
To create a new job, the paper to be used must be defined and must be
available. The printing application must have been created at a system
level in order to be able to carry out tests.
Once a job has been created, you will normally only have to recall the job
and load the correct paper to be able to print it. For duplex jobs, check
that the attachment to be used is available in the print line segment
selected.
Xerox 495 Continuous Feed Duplex Printer Operator Guide Page 7-1