Xerox 495 Operator's Manual page 91

PAPER PATH
Xerox 495 Continuous Feed Duplex Printer Operator Guide
When the stacker table goes up (1), the paper may move to the right
or left (2) and hit the guides (3). This is not good and the printer will
fall into the error "Form length guide held up." To correct the error,
the paper on the stacker table must be readjusted.
9. Press the Stacker Down button on the stacker control panel.
10. Adjust the paper by pressing it against the right side of the stacker.
11. Set the table switch to Auto.
12. Cloose the right stacker door.
13. Press RESET on the touch screen and then set the printer to ready.
REMOVING PAPER
Page 5-13