Xerox 495 Operator's Manual page 169

PROBLEM SOLVING
Lamp Unit
Lamp Unit Lever
Lamp Unit Lever
Lamp Unit
Xerox 495 Continuous Feed Duplex Printer Operator Guide
8. Hold the lamp unit lever of fuser B and pull this slightly towards you.
Autoloader B
9. While pulling the reflector unit lever towards you, open the unit
downward.
10. Raise the autoloader B lever to open it.
After checking for jammed paper, hold the reflector unit lever and
close it completely. Carefully close autoloader B and push the lamp
unit lever in completely.
11. Hold the lamp unit lever of fuser A and pull this slightly towards you.
12. While pulling the reflector unit lever towards you, open the unit
downward.
After checking for jammed paper, hold the reflector unit lever and
close it completely. Push the lamp unit lever in completely.
13. Close the Fuser Door and open the fuser left door.
Autoloader B Lever
Reflector Unit Lever
Reflector Unit
Reflector Unit Lever
CLEARING PAPER JAMS
Reflector Unit
Page 9-5