Xerox 495 Operator's Manual page 150

REPLACING THE ROLLER UNIT
Roller Unit B[R1b]
Guides
Guide Roller
Roller Unit B[R1b]
Page 8-16
clockwise direction, to open the Roller Unit B[R1b] fully.
Thumbscrew
4. Loosen the green thumbscrew on the right of roller unit B[R1b].
5. Grasp the handle of roller unit B[R1b] and pull the unit out fully.
CAUTION
Do not touch the waste toner cap of the roller unit, as it may open
and cause the toner to scatter.
6. Insert the roller unit fully.
Guides
Printer
PERFORMING ROUTINE MAINTENANCE
Retraction Lever
Drum Unit A
Guide Roller
Xerox 495 Continuous Feed Duplex Printer Operator Guide
Waste Toner Cap