Table of Contents
Advertisement
PRODUCT OVERVIEW
Xerox 495 Continuous Feed Duplex Printer Operator Guide
Background colour
The device background changes colour and pattern according to the
device state and its alignment condition."
The device state determines the background colour. The following table
shows the possibilities.
Colour
Red - The device is in error.
To clear the error, you should refer to the relevant error clearing
procedure in the error help.
Light Gray - The device is in a Ready state.
Note: The background colour is light gray and not green
because it is the normal device state and should not retain the
operator attention. If the colour changes to green and is striped,
then it is ready but not aligned.
Yellow - The device is in a Not Ready state.
You need to make the device Ready by pressing the START
button.
Blue - The device is warming up.
You need to wait a few moments while the device warms up.
Purple - The device is in maintenance mode.
Dark Gray - The device is powered OFF.
You need to power it ON before printing.
Orange - The device is in a soft stop state.
The colour becomes striped when the device is not aligned. The
UNDERSTANDING THE TOUCH SCREEN
Meaning
Page 2-21
Advertisement
Table of Contents
