Xerox 495 Operator's Manual page 172

CLEARING PAPER JAMS
Extract in this direction
Paper Removal Lever
Page 9-8
be sure to extract the paper in the direction shown.
Autoloader B
Fuser A
Fuser B
Drum Unit B
Remove the paper from the tractors as follows:
Back Tension Cover
Tractor Cover
•
•
•
•
6. Close each opened section slowly.
7. Reload the paper (see "Paper Loading" on page 5-3).
8. Press the RESET and START switches on the stacker panel.
Paper Cutting Position
Reflector Unit
Drum Unit A
Paper Cutting Position
Second Tractor Cover
Open the tractor cover and detach the paper from the tractor
pins.
Open the back tension cover while holding the lock bracket.
Push the paper removal lever inside, open the second tractor
cover, and detach the paper from the tractor pins.
Remove the paper.
Xerox 495 Continuous Feed Duplex Printer Operator Guide
PROBLEM SOLVING
Do not extract in this direction