Replacing Toner [Kb] - Xerox 495 Operator's Manual

PERFORMING ROUTINE MAINTENANCE

Replacing Toner [Kb]

Xerox 495 Continuous Feed Duplex Printer Operator Guide
To replace the toner for the back marking unit, proceed as follows:
1. Press the button to switch to the consumables view which
shows the usage of all consumables and press the Change button
beside Toner [Kb] in the Back box.
The consumables replacement screen for Toner [Kb] will be
displayed.
2. Open the right and left printer doors.
3. Check that the Toner [Kb] LED is flashing.
4. Slide the toner cassette into the groove of the toner cassette
receptacle and push it in fully.
REPLACING THE TONER
Toner Entry Port [Kb]
Toner Cassette Receptacle
Toner Cassette
Page 8-9