Table of Contents
Advertisement
IMPORTING FLASH OVERLAYS
Importing flash overlays
Left stacker door
Page 7-34
A flash overlay is a bitmap image that will be placed in the same place on
each printed page. Flash overlays can be imported from a CD. Once
imported, they can be renamed or deleted from the system.
Flash overlays can only be used in Line Mode (option) emulations.
1. Open the left stacker door of the printer. A black blanking panel is
located in front of the Stampa PC. This panel contains a small sliding
door that, when opened, allows access to the CD-ROM drive of the
Stampa PC.
2. Unscrew the top left screw of the sliding door and slide open.
3. Insert the CD into the CD-ROM drive on the Stampa PC.
DEFINING PRODUCTION JOBS
Black blanking plate
Xerox 495 Continuous Feed Duplex Printer Operator Guide
Advertisement
Table of Contents
