Table of Contents
Advertisement
ERROR CODES
Code
Display Message
F8-0A
Invalid width
F8-0B
Invalid length
F8-0C Invalid paper size or resolution
F8-FA
IOT print mode mismatch
Page 9-52
1. Select the Definitions tab, then the Paper tab on the touch
screen.
2. Choose the existing paper definition from the Paper pull-down
list.
3. Select the Paper Format field.
4. Select the Width field, type in the correct width, then select the
inch or mm button.
5. Press the OK button to validate.
6. Press the Save button to save the current paper definition.
7. Press the OK button on the Save screen.
8. Press RESET on the touch screen and then set the printer to
ready.
1. Select the Definitions tab, then the Paper tab on the touch
screen.
2. Choose the existing paper definition from the Paper pull-down
list.
3. Select the Paper Format field.
4. Select the Length field, type in the correct length, then select
the inch or mm button.
5. Press the OK button to validate.
6. Press the Save button to save the current paper definition.
7. Press the OK button on the Save screen.
8. Press RESET on the touch screen and then set the printer to
ready.
1. Select the Definitions tab, then the Paper tab on the touch
screen.
2. Choose the existing paper definition from the Paper pull-down
list.
3. Verify that the Paper Format and Paper Thickness are correct.
4. Select the Definitions tab, the Application tab, then the Main tab
on the touch screen.
5. Verify that the resolution in the Resolution pull-down list is
correct.
6. Press RESET on the touch screen and then set the printer to
ready.
The 'Both sides printing' command has been disabled.
1. Select the Engine tab, then the Print Mode tab, on the touch
screen.
2. Check the box beside the 'Both side printing' command.
3. Press RESET on the touch screen and then set the printer to
ready.
Xerox 495 Continuous Feed Duplex Printer Operator Guide
Procedure
PROBLEM SOLVING
Advertisement
Table of Contents
