Importing A Job Definition From The Production Screen; Deleting A Job Definition - Xerox 495 Operator's Manual

DEFINING A JOB

Importing a job definition from the Production screen

Deleting a job definition

Page 7-6
The job definitions can all be amended from the Production screen. You
may want to create or amend the job definition from the settings there.
To create or amend a job from a production job:
1. Select the Definitions tab, then the Job tab.
2. Press the
the current Production screen. The parameters set in the
Production screen are then applied to the Job screen. Importing is
impossible if the job is in the process of modification or if it has the
same name as that on the Job screen.
3. Press the button to save the current job.
The Save screen containing the list of existing jobs is displayed.
4. For a new job, select the Write As field, enter a name for the job
using the alphanumeric keyboard and press the Enter button.
5. Press on the Save screen.
Note: When you press
whether you want to replace an existing definition if it already exists.
To delete a job definition:
1. Select the Definitions tab, then the Job tab.
2. Choose a Job from the pull-down list.
3. Press the button to delete a job.
The Delete screen containing the list of existing jobs is displayed. Press
to delete the job or
Note: You cannot delete the Default job or a job definition in use within
the Production screen.
DEFINING PRODUCTION JOBS
button to import the job parameters from
, you will be prompted to confirm
to exit without deleting.
Xerox 495 Continuous Feed Duplex Printer Operator Guide