Equivalent Input Calibration Procedure - Unipulse F320 Operation Manual

5-1. Equivalent Input Calibration Procedure

The equivalent input calibration uses the following procedure :
Releasing Calibration LOCK
Setting Decimal Place
Setting Scale Division
Equivalent Input Calibration
Calibration Lock
Release the Calibration LOCK that inhibits
calibration.
Set the decimal place.
（omissible if no desired value is present）
Set the minimum value of the digital change
desired
（omissible if no desired value is present）
Set the rated output vale and zero point of the
strain gauge sensor.
Set the calibration of ON to prevent misopera-
tion.
5.CALIBRATION
30