Digital Offset - Unipulse F320 Operation Manual

6.SETTING OF FUNCTIONS

6-4. Digital Offset

This function subtracts a set value from the indicated value. If you make digital
offset , the value which is obtained by subtracting the set value from the
indicated value will be displayed. This is convenient when you cannot obtain
zero by unloading the equipment for some reason or when you want to give
offset.
(Indicated value to be displayed)
49
= (Actual indicated value) - (Digital offset setting value)
Setting of Digital Offset
Select setting mode 1.
1)
＋ －
FNC
Select digital offset.
2)
Press five times.
CAL
HOLD
Use
GAIN
CAL
digital offset setting value.
＋ －
Press key to place a minus sign.
FNC
then use key to validate the setting.
HOLD
To return to the indicated value display, press
Digital Offset （-19999 to 19999）
and keys to set the
ZERO
＋ －
key.
FNC