2Installing In A Control Panel - Unipulse F320 Operation Manual

2INSTALLING IN A CONTROL PANEL

2 INSTALLING IN A CONTROL PANEL
Install the F320 in a control panel by the following procedures.
1. Make a hole in the panel according to the panel cutout dimensions.
＋ 1
92mm
0
-
Panel cutout
＋ 1
45mm
0
dimensions -
2. Remove the guide rails from both sides
.
3. Insert the F320 from the front of the panel.
4. Mount the guide rails from the back, and fix them with the attached screws.
8