Analog Filter - Unipulse F320 Operation Manual

6-7. Analog Filter

This is a lowpass filter filtering the strain gage sensors input signal and cutout
the noise element.
Lowpass filter cutout freguency is selectable in the 3/10/30/100/300/1k Hz.
Setting of Analog Filter
1)
2)
Select setting mode 2.
＋ －
FNC
ZERO
Select analog filter.
Press twice.
CAL
HOLD
Use and
GAIN CAL
then use key to validate the setting.
HOLD
To return to the indicated value display, press
6.SETTING OF FUNCTIONS
Analog Filter
5 : 1kHz
4 : 300Hz
3 : 100Hz
2 : 30Hz
1 : 10Hz
0 : 3Hz
keys to set the analog filter,
＋ －
FNC
key.
52