Calibration Lock - Unipulse F320 Operation Manual

6.SETTING OF FUNCTIONS

6-12. Calibration LOCK

The Setting value LOCK function inhibits changes to setting to prevent changes
to set values or calibrated values through misoperation.
59
CalibrationLOCK
1) Select setting mode 3.
＋ －
FNC ZERO
2) Select calibration lock.
Press twice.
CAL
HOLD
Use and
GAIN
then use key to validate the setting.
HOLD
To return to the indicated value display, press
For setting items locked by using calibration LOCK , see the set
value list on page 25 .
The Digital Zero function by using the
panel is not effective when the calibration LOCK is released（nor
is it effective from the rear panel DZ）.
On completion of calibration set the calibration LOCK.
ZERO
Calibration LOCK
1 : ON
0 : OFF
key to set the calibration lock of ON （1） ．
CAL
ZERO
key.
＋ －
FNC
key on the front