D/A Output Mode - Unipulse F320 Operation Manual

11-4. D/A Output Mode

Set the D/A output mode of the F320 as follows:
1) Select setting mode 4.
2) Select D/A output mode.
20mA (10V) fixed output
When the current output option is equipped, a fixed output of 20mA is made, and
when the voltage output option is equipped, a fixed output of 10V is made.
4mA (0V) fixed output
When the current output option is equipped, a fixed output of 4mA is made, and
when the voltage output option is equipped, a fixed output of 0V is made.
Not linked with indicated value
Scaled analog output linked with sensor input.
Even if the indicated value is held, an output is made according to the changes in
sensor input signal.
Linked with indicated value
Analog output linked with indicated value.
When the indicated value is held, the held value is outputted even if the sensor
input signal changes.
Setting of D/A Output Mode
＋ －
FNC ZERO
Press three times.
Press seven times.
CAL
HOLD
Use and
GAIN
CAL
Press key to validate the setting
HOLD
To return to the indicated value display, press
D/A Output Mode
3 : 20mA (10V) fixed output
2 : 4mA (0V) fixed output
1 : Not linked with indicated value
0 : Linked with indicated value
keys to set the D/A output mode.
＋ －
FNC
11.D/A CONVERTER
key.
98