Connecting Power Input Terminal; 3-2-1Ac Spec - Unipulse F320 Operation Manual

3.CONNECTION

3-2. Connecting Power Input Terminal

3-2-1. AC Spec.
Connect the AC power cord. The input voltage is 100V to 240V AC.
The frequency is 50/60Hz.
Protective ground
B1 B2 B3
(functional ground)
L N F.G.
Within 6mm
Black White Green
← Color indication for accessory AC cable.
1. Make sure that no power is applied.
2. Remove the terminal block cover.
3. Remove the three screws at the lower left of the terminal block, align the
crimp contacts with the screw holes, and then tighten the screws.
4. Mount the terminal block cover.
12