9-2-5Rs-485 Transmission Delay Time - Unipulse F320 Operation Manual

9-2-5. RS-485 Transmission Delay Time
Set this time if the master device cannot process the responses from the F320.
Setting of RS-485 Transmission Delay Time
1) Select setting mode 4.
2) Select transmission delay time.
Use
the transmission delay time,
then use
To return to the indicated value display, press
9.RS-485 INTERFACE (Communication protocol; Modbus-RTU)
Frame Frame
3.5 char + transmission delay time [msec]
＋ －
FNC ZERO
Press three times.
Press three times.
CAL
HOLD
and
GAIN CAL
key to validate the setting.
HOLD
Transmission Delay Time （ 00 to 99）
keys to set
ZERO
＋ －
FNC
key.
76