Table of Contents
Advertisement
[B]
KD-1011 (Paper Feed Pedestal (PFP))
(1)
Turn the power OFF and unplug the power
cable.
(2)
Remove 1 screw and take off the connector
cover.
(3)
Remove 1 screw and the ground wire, and
then disconnect 2 connectors (3 connectors
if the optional damp heater is installed).
(4)
Take off the lower drawer of the equipment
and PFP upper drawer.
e-STUDIO200L/230/280 OUTLINE OF THE MACHINE
Connector cover
Connector of optional
damp heater
2 - 42
Fig.2-63
Fig.2-64
Drawer
Fig.2-65
June 2004 © TOSHIBA TEC
Advertisement
Table of Contents
