Toshiba e-STUDIO200L/230/280 SERIES Service Manual page 274

[C] Separation finger
(1) Take off the fuser unit upper cover
( P.13-11 "[B] Fuser unit upper cover").
(2) Remove 6 springs and take off 6 separation
fingers.
[D] Heater lamp
(1) Take off the fuser unit upper cover
( P.13-11 "[B] Fuser unit upper cover").
(2) Remove 2 springs.
Note:
When installing the spring, catch the spring
on the lower hook.
(3) Remove 4 screws and take off the separation
finger bracket.
e-STUDIO200L/230/280 FUSER UNIT
Separation finger
Spring
Spring
Separation finger bracket
13 - 12
Fig.13-10
Fig.13-11
Fig.13-12
June 2004 © TOSHIBA TEC