Toshiba e-STUDIO200L/230/280 SERIES Service Manual page 200

[K] Drawer feeding unit
(1) Take off the drawer.
(2) Remove 1 screw and take off the drawer
feeding unit by sliding it to the front side.
[L] Tray-up sensor
(1) Take off the drawer feeding unit
( P.9-20 "[K] Drawer feeding unit").
(2) Disconnect the connector and release the
latches to take off the tray-up sensor.
[M] Empty sensor
(1) Take off the drawer feeding unit
( P.9-20 "[K] Drawer feeding unit").
(2) Disconnect the connector and release the
latches to take off the empty sensor.
e-STUDIO200L/230/280 PAPER FEEDING SYSTEM
Drawer feeding unit
Empty sensor
9 - 20
Fig.9-30
Tray-up sensor
Fig.9-31
Fig.9-32
June 2004 © TOSHIBA TEC