Table of Contents
Advertisement
[I]
Paper size detection sensor
(1)
Take off the bypass tray.
(
P.9-17 "[H] Bypass tray").
(2)
Remove 3 screws and take off the bypass
tray upper cover.
(3)
Remove 1 screw and take off the paper size
detection sensor.
[J]
2nd transport sensor / Bypass pickup solenoid
(1)
Take off the bypass unit
(
P.9-17 "[G] Bypass unit").
(2)
Take off the bypass tray
(
P.9-17 "[H] Bypass tray").
(3)
Take off the bypass feed unit
(
P.9-13 "[B] Bypass feed unit").
(4)
Remove 1 screw and take off the bypass
separation roller cover
(
P.9-14 "[C] Bypass separation roller").
(5)
Remove 2 screws and take off the 2nd trans-
port sensor cover.
e-STUDIO200L/230/280 PAPER FEEDING SYSTEM
Bypass tray
upper cover
2nd transport sensor cover
9 - 18
Screw
Screw
Fig.9-24
Paper size
detection sensor
Fig.9-25
Fig.9-26
June 2004 © TOSHIBA TEC
Advertisement
Table of Contents
