Table of Contents
Advertisement
(4)
Disconnect 7 connectors. Remove 2 screws,
release 2 locking supports, and then take off
the high-voltage transformer.
[G] Switching power supply
(1)
Take off the left rear cover
(
P.2-30 "[J] Left rear cover").
(2)
Take off the left cover
(
P.2-31 "[L] Left cover").
(3)
Remove 2 screws and pull out the switching
power supply.
(4)
Disconnect 7 connectors, release the har-
ness from 4 harness clamps.
(5)
Take off the switching power supply.
June 2004 © TOSHIBA TEC
Hight-voltage transformer
Fig.2-54
Harness
clamp
Fig.2-55
Switching power supply
Fig.2-56
e-STUDIO200L/230/280 OUTLINE OF THE MACHINE
2 - 39
Screw
2
Advertisement
Table of Contents
