Toshiba e-STUDIO200L/230/280 SERIES Service Manual page 303

[H] Upper transport roller
(1) Take off the ADU drive unit
( P.15-13 "[G] ADU motor / ADU drive
unit").
(2) Remove 1 clip on the rear side. Then remove
1 pulley and 1 pin.
(3) Remove 1 clip on the front side. Then take
off 2 bushings and upper transport roller.
June 2004 © TOSHIBA TEC
ADU drive unit
Pulley
Clip
Bushing
e-STUDIO200L/230/280 AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0102)
15 - 15
Fig.15-24
Pin
Fig.15-25
Clip
Bushing
Upper transport roller
Fig.15-26
15