Table of Contents
Advertisement
[W] Registration roller
(1)
Take off the front cover
(
P.2-27 "[A] Front cover").
(2)
Take off the process unit
(
P.11-8 "[A] Process unit").
(3)
Take off the ADU
(
P.15-10 "[A] Automatic Duplexing Unit
(ADU)").
(4)
Take off the bypass unit
(
P.9-17 "[G] Bypass unit").
(5)
Take off the transfer unit
(
P.11-15 "[O] Transfer unit").
(6)
Take off the SYS board case
(
P.2-36 "[D] SYS board case").
(7)
Take off the connecting port cover
(
P.2-32 "[O] Connecting port cover").
(8)
Take off the main motor drive unit
(
P.10-5 "[B] Main motor drive unit").
(9)
Take off the registration roller clutch
(
P.9-24 "[S] Registration roller clutch").
(10) Remove 2 screws and take off the terminal
holder.
(11) Release the latch and knob.
(12) Remove 2 springs of both front and rear
sides.
e-STUDIO200L/230/280 PAPER FEEDING SYSTEM
Terminal holder
9 - 30
Fig.9-60
Knob
Fig.9-61
Spring
Fig.9-62
June 2004 © TOSHIBA TEC
Advertisement
Table of Contents
