Toshiba e-STUDIO200L/230/280 SERIES Service Manual page 179

[C] Internal cooling fan-2
(1) Take off the rear cover
( P.2-28 "[C] Rear cover").
(2) Remove 1 screw and take off the harness
clamp. Take off the duct upper cover and
ozone filter.
(3) Disconnect 1 connector and remove 2
screws, and then take off the duct and the
internal cooling fan-2.
June 2004 © TOSHIBA TEC
Duct upper cover
Ozone filter
Fig.8-16
Connetor
Duct
Screw
Screw
Fig.8-17
e-STUDIO200L/230/280 LASER OPTICAL UNIT
8 - 11
04/07
Internal cooling fan-2
8