Toshiba e-STUDIO200L/230/280 SERIES Service Manual page 62

(4) Disconnect 11 connectors and release the
harness form 5 harness clamps.
(5) Remove 4 screws, release 1 locking support,
and then take off the LGC board.
[F] High-voltage transformer
(1) Take off the connecting port cover
( P.2-32 "[O] Connecting port cover").
(2) Release the harness from 6 harness clamps.
(3) Remove 4 screws and take off the high-volt-
age transformer cover.
e-STUDIO200L/230/280 OUTLINE OF THE MACHINE
Harness clamp
Harness clamp
Harness
clamp
2 - 38
Fig.2-51
LGC board
Fig.2-52
Hight-voltage transformer cover
Fig.2-53
June 2004 © TOSHIBA TEC