Table of Contents
Advertisement
(13) Take off 3 gears and 1 timing belt.
(14) Remove 1 E-ring, 1 pin and 1 pulley.
(15) Take off the guide roller on the rear side.
(16) Remove the seal on the front side. Remove 1
E-ring and 1 bushing.
e-STUDIO200L/230/280 DEVELOPMENT SYSTEM
Timing belt
Gear
Guide roller
Pulley
Pin
E-ring
E-ring
12 - 16
Gear
Fig.12-26
Fig.12-27
Seal
Bushing
Fig.12-28
June 2004 © TOSHIBA TEC
Advertisement
Table of Contents
