Table of Contents
Advertisement
(3)
Take off the pressure roller. Remove 2 E-
rings and the bearings on both ends of the
pressure roller.
Note:
The pressure roller is quite heavy. Do not
drop the roller when lifting up.
[G] Cleaning roller
(1)
Take off the pressure roller
(
P.13-14 "[E] Fuser roller").
(2)
Remove 2 screws and take off the cleaning
unit.
(3)
Press down the holder and take off the
cleaning roller.
June 2004 © TOSHIBA TEC
Pressure roller
Bearing
E-ring
Fig.13-19
Cleaning unit
Fig.13-20
Holder
Fig.13-21
13 - 15
Bearing
E-ring
Cleaning roller
e-STUDIO200L/230/280 FUSER UNIT
13
Advertisement
Table of Contents
