Toshiba e-STUDIO200L/230/280 SERIES Service Manual page 204

(4) Loosen 1 setscrew and take off the drawer
feed clutch.
Note:
Attach the clutch to the shaft referring to the
figure at right.
[S] Registration roller clutch
(1) Take off the main motor drive unit
( P.10-5 "[B] Main motor drive unit").
(2) Loosen 2 setscrews. Disconnect 1 connector
and take off the registration roller clutch.
e-STUDIO200L/230/280 PAPER FEEDING SYSTEM
Setscrew
0.2-0.5mm
Setscrew
Registration roller clutch
9 - 24
Drawer feed clutch
Fig.9-42
Fig.9-43
Connector
Fig.9-44
June 2004 © TOSHIBA TEC