Table of Contents
Advertisement
(3)
Remove the spring and take off the drum
separation fingers.
Note:
When the drum separation fingers have been
replaced, check if the pressure movement is
normal by moving them with your hands.
[K]
Recovery blade
(1)
Take off 3 drum separation finger units
(
P.11-12 "[J] Drum separation finger").
(2)
Remove 2 screws, and take off the whole
recovery blade with the bracket.
[L]
Ozone filter
(1)
Open the bypass tray and ADU.
June 2004 © TOSHIBA TEC
Drum separation finger
Fig.11-21
Recovery blade
Fig.11-22
Fig.11-23
e-STUDIO200L/230/280 DRUM RELATED SECTION
11 - 13
11
ADU
Bypass tray
Advertisement
Table of Contents
