Toshiba e-STUDIO200L/230/280 SERIES Service Manual page 195

[D] Bypass feed roller
(1) Take off the bypass feed unit
( P.9-13 "[B] Bypass feed unit").
(2) Remove 2 screws and take off the upper
guide.
(3) Lift up the arm, remove 1 screw, and then
take off the bracket.
(4) Remove 1 clip and take off the bypass feed
roller unit from the shaft. Then take off the
bypass feed roller.
June 2004 © TOSHIBA TEC
Fig.9-15
Arm
Bracket
Fig.9-16
Bypass feed roller
Bypass feed roller unit
Clip
Fig.9-17
e-STUDIO200L/230/280 PAPER FEEDING SYSTEM
9 - 15
Upper guide
9