Table of Contents
Advertisement
(3)
Release the harness from the harness clamp
and pull out the discharge LED.
[D] Main charger
(1)
Take off the discharge LED unit
(
P.11-9 "[C] Discharge LED").
(2)
Pull out the main charger and take it off by
sliding it to the rear side.
Note:
Be careful not to touch or scratch the drum
surface at this time.
[E]
Main charger grid
(1)
Take off the main charger
(
P.11-10 "[D] Main charger").
(2)
Remove the spring and take off the main
charger grid.
Note:
Do not touch the mesh area of the grid.
e-STUDIO200L/230/280 DRUM RELATED SECTION
11 - 10
Discharge LED
Fig.11-12
Main charger
Fig.11-13
Main charger grid
Spring
Fig.11-14
June 2004 © TOSHIBA TEC
Advertisement
Table of Contents
