Table of Contents
Advertisement
Ventilator Overview
2.9
Alarm Menu
Alarm menu with ventilation on standby.
Alarm menu when not in standby.
Title line:
1
Displays ventilation mode and the
following symbols:
•
Battery
if the ventilator is
powered by the internal battery
•
Audio paused
currently inhibited.
•
Alarm paused
been cancelled manually and the
cause of the alarm remains.
•
Apnea Alarm deactivation
•
Exhalation valve
•
No exhalation valve
Status/monitored data window:
4
•
Ventilation stopped (Standby):
displays the message, "PRESS
TO START VENTILATION."
•
Ventilation on: parameters are
monitored and displayed.
•
The Inspiratory Effort Detected
symbol
appears adjacent to the
monitored I:E ratio when the
patient actively triggers a breath.
2-8
1
3
1
3
Alarm settings:
2
Displays the specific alarm parameter
values for the currently selected
ventilation mode, which are:
.
•
Min and Max alarm threshold
settings, and
if an alarm is
•
Current monitored patient
readings, or hyphen (-) when
if an alarm has
ventilation is in standby.
symbol.
symbol.
Alarm message window:
5
•
For Active alarms, scrolls through
active alarm messages in flashing
reverse video.
•
For Inactive alarms, displays the
last alarm along with its trigger
date and end-of-event time.
Refer to chapter
Troubleshooting"
information.
2
2
3, "Alarms and
for more
Figure 2-5. Alarm Menu
Access line to Alarm
3
Logs menu.
Highlight this line and
ENTER
press the
key to display the
Alarm Logs menu.
Refer to manual section
3.3, "Alarm Logs
Menu".
User's Manual
4
5
4
5
Advertisement
Table of Contents
Troubleshooting
