Manufacturer's Declaration; Table A-20. Electromagnetic Emissions - Covidien Puritan Bennett 560 User Manual

A.10 Manufacturer's Declaration
The following tables,
tor's electromagnetic emissions, electromagnetic immunity, and recommended separation distances between
the ventilator and portable and mobile RF communications equipment, as well as a list of compliant cables.
Warning
Portable and mobile RF communications equipment can affect the performance of the
Puritan Bennett™ 560 Ventilator. Install and use this device according to the information
contained in this manual.
The ventilator should not be used adjacent to or stacked with other equipment, except as
specified in this manual. If adjacent or stacked use is necessary, the ventilator should be
observed to verify normal operation in the configurations in which it will be used.

Table A-20. Electromagnetic Emissions

The Puritan Bennett™ 560 Ventilator is intended for use in the electromagnetic environment specified
below. The customer or the user of the ventilator should assure that it is used in such an environment.
RF emissions
CISPR 11 / EN 55011
RF emissions
CISPR 11 / EN 55011
Harmonic emissions
IEC / EN 61000-3-2
Voltage fluctuations/
flicker emissions
IEC / EN 61000-3-3
User's Manual
Table A-20 through Table
Group 1
Class B
Class A
Complies
A-23, contain the manufacturer's declarations for the ventila-
The ventilator uses RF energy only
for its internal functions. Therefore,
its RF emissions are very low and are
not likely to cause any interference
in nearby electronic equipment.
The ventilator is suitable for use in all
establishments including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic
purposes.
Specifications
A-9