Starting Database File Upload/Download
Transferring Process
When database file transfer is ongoing, you can monitor the process.
Serial, Modem, and TCP connection use Z-Modem transfer protocol and the sending process
will be displayed in the Z-Modem window.
Note: In version3, TCP connection isn't using Z-Modem transfer. So, you can finish the
process quickly.
Finishing DataBase File Upload/Download
After the S/W transfer process is finished a result dialog will be displayed. If you press the "OK"
button, you will reveal the dialog below. You can start another upload/download by selecting
the Yes button.
Note: It is strongly recommended that after you upload any type of DB, that you reset the SBX
IP 320 system.
Chapter 7: Using Database Upload/Download
SBX IP 320 Installation Guide
-
7
8