Important Notes For Users - Vertical SBX IP 320 Installation Manual

Introduction

Important Notes for Users

•
•
•
•
•
•
•
[SBX IP 320 Remote Diagnostic Tool] is installed with the PC Admin program.
To use a modem connection with this program, TAPI and TAPI32 Dynamic-Link Library
and TAPISRV.EXE must be installed in MS-Windows. These files are installed in most of
the PCs in which MS-Windows is installed.
When you uninstall [SBX IP 320 Remote Diagnostic Tool], some files may not be
deleted if the files were create after the installation of this program. Those files can be
[PhoneNo.txt] file that is created after the [Save] button is clicked on [Phone Number
Dialog], or other saved files or backup files, and so on.
If [GSXD Test] command is executed on the system that does not use GSXD chipset, the
result of [GSXD Test] shows a message that indicates this condition.
To log-on to the SBX IP 320 system again after log-out from the SBX IP 320, click the
[Enter] button in the [Input Box Bar].
When this program is executed, some components of this program (i.e. buttons in
[Command Bar]) may be hidden. In this case, enlarge or maximize the window, then you
will see all the components of this program.
The title of a button in the [Command Bar] may be aligned into two lines if the length of
the title is long.
SBX IP 320 Installation Guide
Chapter 9: Remote Diagnostics
-
9 3