[Commands] Menu
Procedure:
1.
2.
-or-
Use the icon
[Commands] Menu
This program can send commands to the SBX IP 320 system to get diagnostic results while a
connection is established. This program reads command configuration from the [CmdConf.txt]
file that is installed with the executable file, and uses the data for [Menu], [Command Bar], and
[Input Box Bar]. The [CmdConf.txt] file is a command configuration file, and the contents of
the file follow special rules for command configuration.
Select the [Connection] menu.
Select the [LAN Disconnect] sub-menu in the [Connection] menu.
in the toolbar to execute the same command.
SBX IP 320 Installation Guide
Chapter 9: Remote Diagnostics
-
9
21