Vertical SBX IP 320 Installation Manual page 88

Installation
Up/Download by Serial Connection
1.
•
•
•
•
•
2.
Enter the following entries for Serial connection:
Serial Port -- Serial port No. in PC connected to SBX IP 320 COM port.
Baud Rate -- Choose the transferring baud rate (see Note).
Admin Password -- If SBX IP 320 requires a password to upload/download MBU S/W
DB.
Database File -- The database file to be uploaded/downloaded.
Check Button -- Check this button if you want to reset the SBX IP 320 system after
uploading DB successfully. It is strongly recommended that after you upload any type of
DB, that you reset the SBX IP 320 system.
Note: The transferring baud rate in the PC and the baud rate of COM port in the SBX IP
320 system must be identical. You can program the SBX IP 320 system baud rate in PGM
174.
Note: If you set the PC's and SBX IP 320 system's transferring baud rate to 57600 bps,
it might happen that some keysets display incorrect characters in their LCD, or the SBX
IP 320 system may be unstable. That rate is the fastest way of upgrading, but 19200bps
and 9600bps are also available.
Press the [Next] button to go to the next step.
Chapter 7: Using Database Upload/Download
SBX IP 320 Installation Guide
-
7 4