Basic Programming
Logical Slot Assignment (PGM 103)
If assignment of each board is end, it is automatically registered by slot number order. You can
reassign the slot order of each CO Line or extension line as appropriate to your circumstance.
COL Board
1.
Press the [TRANS/PGM] button + PGM number (103)
2.
Press [FLEX1] button.
3.
Enter logical slot number (CO board slot: 05, 07, 08, 10)
4.
Press [HOLD/SAVE] button to accept change.
Figure 6-1 Slot Locations
SBX IP 320 Installation Guide
Chapter 6: Starting the SBX IP 320
-
6
8